Blog

Get the Newest Blog Direct to your Inbox

* indicates required
  • CWNP

Subjectivity, Scrutiny, and Simpletons

Every few months, we see press from vendors pointing to tests that show why they’re the best. Best throughput, best coverage, best capacity performance, best multimedia, best whatever. Sometimes the test is done by a contracted third-party, and other times we’re graced with simple marketing tests conducted by the “best” vendor itself. Before I go any further, let me be loud and clear that this article has nothing to do with the latest two or three tests that have hit the news. It is not aimed at any specific vendor, nor is it intended to say how a product should or shouldn’t be marketed, or even that a test is or isn’t reliable. This article is here to say how I think a competitive test should be conducted by a vendor, a biased (or unbiased) third-party, or otherwise, IMHO.

Continue reading...

  • CWNP

Meritorious Meraki: A Review

“Simplicity, simplicity, simplicity! I say, let your affairs be as two or three, and not a hundred or a thousand; instead of a million count half a dozen…” – Henry David Thoreau, Walden When I first logged into the Meraki management platform (i.e. Meraki Cloud Controller – MCC) and spent a few minutes observing the high-level organization of their interface, the previous Thoreau quote came immediately to mind. As a staunch believer in simplifying life, I must say that Meraki took Thoreau’s words and applied this principle to their solution, including the GUI. Continue reading...

  • CWNP

Dynamic Frequency Selection

In the beginning stages of my Wi-Fi journey, 802.11h was confusing. Just like everyone else, I was drowning in the world of faceless acronyms. Over time, the meaning of Dynamic Frequency Selection (DFS) started to take on a concrete form and I assimilated the term into my armory. If you’re feeling that way, I wanted to share some thoughts on DFS that should help to secure it in the memory as an important topic. Continue reading...

  • CWNP

The Teeter-Totter of GUI Complexity

All vendors must address a problem that I like to call the teeter-totter of GUI complexity. OK, so I just made that up, but here’s the gist. First, their solution should offer feature richness. Reaching the broadest possible customer market means having the most flexible configuration choices, right? Conversely, keeping customers happy and minimizing confusion means that GUI simplicity must be maximized. Impossibly complex interfaces are bad. Flexibility goes up, simplicity goes down. Simplicity goes up, flexibility goes down. Teeter. Totter. Continue reading...

  • CWNP

My Chipset is Cooler Than Your Chipset

It would seem that 802.11n has initiated a parade that looks more like the running of the bulls at Pamplona than the Macy’s Thanksgiving Day Parade. Chipset manufacturers, then vendors, are racing for their lives to capitalize on the technical goods introduced by 802.11n. This morning Intel announced a litany of new core processors, including four new Centrino 802.11n Wi-Fi chipsets, one of which integrates WiMAX. At face value, the basic tech specs don’t look much different than their previous set (Intel 4965, 5100, 5300, 5350) of 802.11n adapters, but I’m sure that performance and efficiency are improved. Continue reading...

  • CWNP

The Next Decade for WLANs

Happy New Year from CWNP! It seems fitting that, before moving forward into the next decade, we take a little look back at the past ten years. CWNP came to being at the beginning of the decade; we expanded and contracted throughout the decade and became recognized as a vendor-neutral industry authority. We couldn’t be more excited about some new products coming to market in 2010! We witnessed the emergence of Wi-Fi as a primary and pervasive network access method, growing from its infancy in the early 21st century to a mature technology. Just think, 10 years ago, 802.11b—and 11 Mbps—was king (802.11a was mostly ignored). 802.11n ushers us into a new term where 600 Mbps will soon be the norm.

Continue reading...

  • CWNP

Fluke Competes with Cognio

I’m a fairly self-conscious writer.  There’s plenty of good writing on the web to capture our limited attention, so if you take the time to read these articles, let me start by saying we appreciate you!  A primary part of my job is to know as much as possible about the industry, including new features, products, standards, and vendor solutions.  In that interest, I spend a lot of time sifting through potential ideas for the blog and, hopefully, presenting valuable information here.  Back to my self-consciousness… I bring that up only because I never want to sound like a broken record around here.  However, I realize that I have a predilection for writing about laptop-based analysis products and free software, so here’s one more for the books that falls into the former category.  I’m convinced this one is noteworthy.

Continue reading...

  • CWNP

First Certification: 3x3:3

By now, you’re likely well informed about the 802.11n-associated lingo related to MIMO, but if you’re not, here’s a quick tutorial before I get to the point of the article.  When referring to 802.11n devices, companies often use an abbreviation that looks something like this: 2x2, 2x3, or 3x3 (pronounced 2-by-2, etc.).  These numbers refer to the number of transmit (Tx) and receive (Rx) radio chains, respectively, that are part of the MIMO hardware design.  The first number (the ‘2’ in 2x3, for example) is the number of transmit chains.  The second number (the ‘3’ in 2x3, for example), as you’ve probably already deduced, is the number of receive radio chains.  If you remember from 802.11a/b/g SISO systems, there is only one transceiver with one transmit and receive radio. 

Continue reading...

  • CWNP

Wireless Security Implications of 802.11n

I am sure that all of us have bumped into IEEE 802.11n at some point in time – it is the latest sensation in the 802.11 family of standards. It enhances the operative range of Wi-Fi devices and enables wire-speeds. It is no surprise that most (probably all) of the wireless LAN (WLAN) equipment vendors have announced support for 802.11n. Each vendor seems to be claiming that they have the “most conducive” architecture to avail the performance benefits of 802.11n. In this article, as usual, I would like to get your attention to another important aspect of an 802.11n deployment – security. While it doesn’t explicitly introduce new security features, 802.11n does introduce certain unique challenges to your enterprise wireless LAN (WLAN) security.  Here’s how:

Continue reading...

  • CWNP

Outsourcing 802.1X Authentication Services

I recently announced a new business, NoWiresSecurity. We provide a hosted service called AuthenticateMyWiFi. This service makes it much easier for businesses to use the Enterprise mode of WPA or WPA2 (802.11i) encryption for their wireless networks.

In this post, we'll discuss why outsourced RADIUS/802.1X services are needed.

Continue reading...

Page 25 of 39