Wireless signal

1 posts by 1 authors in: Forums > CWNA - Enterprise Wi-Fi Admin
Last Post: June 27, 2008:
  • BryanH Escribi?3:

    Setting the data rates on the AP to only the higher ones will help to keep stations at distance off the AP as well.

    If the data rate had been set to limit effective range, then he would not have been able to see the signal in the second location. If you see the signal in a Wi-Fi client, then the client has gone through active or passive scanning successfully, which says that the data rate was low enough to have successful communication.


Page 1 of 1
  • 1